NJR-RW01UHD 4K@60 HDMI Decoder Rugged Chassis

  • Rugged chassis for Event/Staging
  • Up to 4K@60 (4:4:4)
  • HDCP 1.4/2.2
  • Zero frame latency
  • Seamless switching (freeze)
  • Videowall and Multiview
  • Neutrik connectors

Status Model number Description
NJR-RW01UHD-MM Multimode Fiber
NJR-RW01UHD-SM Singlemode Fiber

Description

The NJR-W01UHD is a point-to point AV over IP solution for high definition signal extension via fiber optic cables.
This IP-NINJAR model employs Neutrik’s robust connector and rugged and lightweight chassis to accommodate event/staging market needs.The NJR-W01UHD leverages 10 Gb Ethernet switches to control 4K@ 60 (4:4:4) signals with zero frame latency.
RS-232C bidirectional communication and LAN transmission are also supported.
Combined with the NJR-R04HD, 4K@60 signal that is sent from the NJR-TW01UHD can be divided into four 1080p@60 signals and be displayed on sink devices. When using the NJR-T04HD and the NJR-RW01UHD together, four ports’ 1080p@60 signals that is sent from the NJR-T04HD can be displayed as 4K@60 signals on a sink device.

Specifications

ItemDescription
Input1 input
Digital signal for extension
Format: IP-NINJAR protocol
RS-232C, LAN
Connector: Neutrik’s LC (opticalCON DUO series)
Output1 output
HDMI/DVI 1.0
TMDS single link
HDCP 1.4/2.2, HDR
Connector: Neutrik’s female HDMI Type A
FormatVGA / SVGA / XGA / WXGA
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
Color depth24 bit, 30 bit, 36 bit Deep Color
Dot clock25 MHz to 600 MHz
TMDS clock25 MHz to 300 MHz
TMDS data rate0.75 Gbps to 18 Gbps
Digital audio outputMulti-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz
Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Analog audio output1 output
Stereo LR balanced
Output impedance: 100 Ω balanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Neutrik’s 2 female XLR (3-pin)
Cable forPolishingFor multimode : PC polishing (recommended)
For singlemode : UPC polishing(recommended), SPC *APC is not supported
extensionTransmission distancesMultimode fiber(OM3) : Up to 984 ft.(300 m)
Singlemode fiber(OS1) : Up to 6.21 mi.(10 km)
Singlemode fiber : Up to 24.85 mi.(40 km, optional)
External controlRS-232C1 port
Neutrik’s male D-sub (9 pin) connector
Full duplex, up to 115.2 kbps
LAN1 port
Neutrik’s RJ-45 (etherCON type)
10Base-T/100Base-TX/1000Base-T (Auto Negotiation),
Auto MDI / MDI-X
FunctionDDC buffer, Connection Reset
GeneralPower100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Neutrik’s powerCON type
Power consumptionAbout 17 Watts
Dimensions8.5 (W) × 1.7 (H) × 11.4 (D)” (216 (W) × 44 (H) × 290 (D) mm)
(Almost equivalent to half rack wide, 1U high) (Excluding connectors and the like)
Weight4.6 lbs. (2.1 kg)
TemperatureOperating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
HumidityOperating/Storage : 20% to 90% (Non Condensing)

SFP+Specification

ItemNJR-W01UHD-MMNJR-W01UHD-SM
FiberMultimode fiberSinglemode fiber
Wave length850 nm (VCSEL Laser)1310 nm (DFB laser)
Max. transmission distancesOM3: 984 ft. (300 m)OS1: 6.21 mi. (10 km)
Receiver sensitivity (OMA) @10.3Gbps-11.1 dBm or higher-12.6 dBm or higher
Average Launch Power-5 dBm to -1 dBm-8.2 dBm to +0.5 dBm
Max. input power+0.5 dBm+0.5 dBm
ConnectorLC (Duplex)

Diagrams